Portable Anti Keylogger

Angel Computer Tricks

This post will show  show you how to make your account safe in different internet house.
Simply follow this steps:
1. Copy paste the anti keylogger in your flash drive that i was attached to my blog.....don't worry its free for you..if ever you cannot see the my file...you can email me through mr_angel_tsai@yahoo.com
2. Then after you sit on the internet house just simply run it to make sure no keylogger installed in machine.
3. That's it!!! your done...
4. You can now surf whatever.....with guardsafe.....
Thank For Reading...

Speed up your internet by 20%

Angel Computer Tricks
Contact Number: mr_angel_tsai@yahoo.com

Microsoft reserves 20% of your available bandwidth for their own purposes like Windows Updates and interrogating your PC etc

You can get it back:

Click Start then Run and type "gpedit.msc" without quotes. This opens the group policy editor.

Then go to:
--> Local Computer Policy
--> Computer Configuration
--> Administrative Templates

--> Network

--> QOS Packet Scheduler

--> Limit Reservable Bandwidth.

Double click on Limit Reservable bandwidth.

 It will say it is not configured, but the truth is under the 'Explain' tab i.e." By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default."
So the trick is to ENABLE reservable bandwidth, then set it to ZERO. This will allow the system to reserve nothing, rather than the default 20%.It works on Win 2000 as well.

Removing shortcut arrows in desktop

Angel Computer Tricks
Contact Number:  e-mail us www.mr_angel_tsai@yahoo.com

Removing the Shortcut Icon Arrows

1.Open RegEdit
2.Open the Key HKEY_CLASSES_ROOT
3.Open the Key LNKFILE
4.Delete the value IsShortcut
5.Open the next Key PIFFILE
6.Delete the value IsShortcut
7.Restart the Windows

<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Clone hard disk without any software

Angel Computer Tricks
Contact Number: +639168284536 or mr_angel_tsai@yahoo.com


Tuesday, September 11, 2007
How to Clone a Hard Drive
Did know that you could clone your current Hard Drive without having to by extra
software? Maybe you didn't know that all that you needed, was already set up on
your current system? Well, it is... and if you follow this tut, you shouldn't have
much of a problem.


Make sure that you have a Master and a Slave setup on your system. The Slave drive,
in this case, is where all the data on the Master is going to go to.

First: Perform a Scandisk your Master drive and follow that with a thorough Defrag.
If you have an Antivirus program, do a thorough sweep with the AV first, then do the
Scandisk, followed by the Defrag.

Second: Do the same thing to the target drive, as you did the Master: Scandisk then
a thorough Defrag.

Third: Right-click on the Target drive and click on Format. When the box comes up,
click your mouse onto the "Full" button.

Fourth: After Formatting the Target drive, run a Scandisk again and click on the
button that says "Autofix Errors".

Fifth: In this final part, you might want to cut-and-paste to code in, unless you
are sure that you can do it without making any mistakes:

Click on the "Start" button, then click on the "Run..." button, then place the
following into the Runbox:

"XCOPY C:\*.*D:\ /c/h/e/k/r" (minus the quotes, of course) then press the "Enter"
button.

If you receive an error message, then remove the space from between XCOPY and C:\

Anything that should happen to come up in the DOS box, just click "Y" for "Yes".
When its all finished, pull the original Master from the system, designate the
Slave as the Master (change your jumpers), then check your new Master out.

This tut has worked and has been tested on all systems except for Windows 2000,
so you really shouldn't have any problems. If, by any chance, you should come
across a snag, message me and I'll walk you through it.